>>Ian: This is the Crusader Mobile Mains
kit, and this is what you need to run mains power into your tent. Its got surge protection, a circuit breaker
just like you have at home. And most importantly 3 sockets just like you’ve got in your house
There’s a 20metre lead which will run out of your tent to the site post where you will
find something like this where you plug that into it and off you go You’ll definitely got to have one of these,
because at the campsite they check that you’ve got on of those. You can’t bodge itself,
because you’ll end blowing the electricity on the campsite and being very unpopular.
So we will go have a look at how you feed it into your tent. Most tents at GO Outdoors will have access
a point for the power lead to head out to the campsite site post. If you have a look
at the outside of the tent you will see a logo like this. What you will find is a zip,
unzip that, and simply feed the lead through. Little bit of safety advice, where possible
try to keep them of the floor. So hang them up (its got a hanging bit) or put them on
a table. That’s pretty much it. If you need to know
anything else visit the website or pop into one of our stores. Cheers We will have a look at how you put it into
a tent.. wheerr heeey!!